Dobe Battery Pack For PS5 TP5-0550

1. The charging current is 560MA, and the time required to fully charge: about 3 hours;
2. When the charging bag is in the standby state, close all output ports and enter the dormant state. At this time, the product Enter into low power consumption to achieve the purpose of energy saving and environmental protection;
3. In the standby state, the battery pack can be detected by the power detection button to detect the power of the built-in battery pack, the power detection indicator LED is tested from low to high, and the power indicator shows 30 It will automatically turn off after 2 seconds; or press and hold the battery detection button for 2 seconds to turn it off.
4. In the charging state of the charging bag, the LED power indicator will check from low to high, and then the corresponding power value will be always on, indicating the current power of the charging bag. After the charging bag is fully charged, the four battery indicators will be on; until it is unplugged The external adapter on the charging bag will go out.
5. When the charging bag is charging the gamepad, the current battery indicator will always be on, and the number of LED lights always on represents the charging bag The remaining power of the battery is convenient for you to control the power in the charging bag;
6. The battery power detection function is set inside the product, when the power of the charging bag continues to decrease as the gamepad is charged, and is below the normal discharge range of the charging bag , The first battery indicator LED flashes quickly to prompt charging. When it is completely out of power, the LED light is turned off, and then the output port is closed to protect the battery inside the charging pack from over-discharge damage.
7. Output short-circuit protection: When the output port is short-circuited, the output voltage will be automatically turned off. To activate again, you need to recharge the charging bag to activate.